Racing Oils

TriboDyn Patented Premium Synthetic 2-Cycle Oil has been approved for all street, marine & off-road vehicles including high performance & all forms of racing. It is specifically designed for maximum performance in all 2-Stroke oil applications, including direct fuel injected (DFI), electronic fuel injected (EFI) & premix lubricated engines for all makes of snowmobiles, motorcycles, lawn mowers, chainsaws, golf carts, ATV’s, scooters, mopeds and small HP engines calling for an API TC category two-cycle and/or a category FIM 4 motor oil. Is clean-burning for low smoke and prevents plug fouling, is a power valve friendly lubricant, recommended where an ashless high-performance oil is required & helps prevent piston ring & exhaust power valve sticking, piston skirt scoring, & carbon deposits. Improves throttle response, has superior cold temperature fluidity, -53°F pour point, for complete & easy mixing in gasoline for faster & easier starts. This patented technology also creates a superior lubricating film strength that provides the ultimate in protection & high-temperature performance.

TriboDyn Patented Premium Synthetic 2-Cycle Oil is formulated into a clean-burning complex mixture of extreme pressure lubricants combined with a “High Performance Coating Technology” that is engineered to maximize fuel efficiency, minimize friction & wear, increase part & engine life, reduce operating temperature and perform under extreme pressure & heat. This unique formula also provides continuous protection by dispersing & clinging to critical areas without creating any drag, providing both start-up and continuous benefits while protecting against corrosion. The proprietary technology is an “Intelligent” material that is attracted to areas of heat and friction, as pressures increase with RPM or load, the special liquid lubricants combined with active “Coating” technology in the oil can form a self-lubricating “Ceramic” film in high load and heat areas, providing critical protection that actively seeks out areas needing increased lubrication, and at times not simply reduce or eliminate wear, but can also repair damaged surfaces.

Applications: 

TriboDyn Patented Premium Synthetic 2-Cycle Oil meets or exceeds the following service classifications:  API TC and JASCO FB, TC-W3, ISO-EGD, 2-Cycle Engine Oil is licensed by National Marin Manufacturers Association (NMMA). For use in direct fuel injected (DFI), electronic fuel injected (EFI) & premix applications that require API TC oils.

Oil Injection:

Pour directly into the tank. In premix applications: 40:1 to 50:1. Refer to engine manufacturer’s recommendation.

Directions for use:

Follow all engine manufacture’s service & performance recommended specifications. Warranty compliant for all major
manufacturers including Ski-Doo, Polaris, Mercury, Suzuki, Yamaha and Arctic Cat. Is compatible with most conventional and synthetic two-stroke oils. NOT SUITABLE FOR USE WITH ALCOHOL OR NITRO-METHANE FUELS.

WARNING: 

Contains petroleum distillates. Avoid direct exposure. May cause skin or eye irritation. Ingestions may cause GI tract irritations or stomach discomfort. Inhalation of oil mists or heated oils may result in respiratory tract irritation. Slip hazard when spilled.

FIRST AID:

EYES - Flush with water for 15 minutes; get medical attention if eye irritation persists.
SKIN - Wash with soap and water get medical attention if irritation develops.
INGESTION - DO NOT INDUCE VOMITING - Rinse mouth with water; get immediate medical attention.
INHALATION - Remove exposed person to fresh air if adverse effects are observed; get medical attention if symptoms occur.